Magnet Conveyor TRAP Series

Features:

The used cutting fluid travels to a dirty tank from a gear grinder - any filtration magnets located inside the dirty tank capture magnetic metal powder - a scraper scrapes off the sludge - a roller squeezes out cutting fluid from the sludge - the sludge is discharged.
Cyclone-separator or backwashing filters remove non-magnetic grinding powder and binding agent from the cutting fluid - the fluid travels to a clean tank.

Benefits:

Magnets(using permanent magnets)can be used for both oil-base and water-base fluid.
Collect oil/fluid until the last drop, and recycle it.
50% less industrial waste management cost in many case.
Low operation cost and low maintenance cost, 1/5 in many cases.

Click to watch the video of Magnet Conveyor TRAP-series

Magnet conveyorTR AP-type: Filtration example with working fluid

	Before Magnets	After Magnets	Filtration rate
Shaving	47.8mg/100ng	⇒ 5.2mg/100mg	92%
Honing machines	73.1mg/100mg	⇒ 8.4mg/100mg	87%
Super Finish	78.7mg/100mg	⇒ 9.6mg/100mg	82%
Precision Rolling	74.8mg/100mg	⇒ 8.8mg/100mg	85%
Thread grinding machines	48.2mg/100mg	⇒ 4.8mg/100mg	90%
Centralized treatment	65.7mg/100mg	⇒ 9.8mg/100mg	85%

* Flexible to adjust for available space and for required specifications.

Application example : Gear Grinder
Fluid type : Oil-base coolant

TRAP-200-2F
Magnet Conveyor Model TRAP-200-2F is equipped with 33 sheets of filtration (Neodymium) magnets and a sludge squeezing roller.
Tank capacity - Dirty tank: 1249L, Clean tank: 742L. They are completely separate.
Fluid delivery pump's flow rate - Pump for Nozzle/Washing: 200L/min, for Dressing/Cooler: 100L/min, for Fine filtration: 200L/min, for Bachwashing: 40L/min.